Filter
Top Products
Chapter 5: Subsystem Maintenance and Upgrading
Figure 5
5
-2: Loosening the Retention Screws from the Controller Module
Step 7. Disconnect all cables from the controller module. These include the
cables connecting to host or cascaded subsystems, and any cables
connecting the COM ports.
Step 8. Remove the controller module by pressing down the two ejection
levers. The controller will automatically be eased out of the module
bay. Gently pull the controller module out of the subsystem with one
hand underneath to support the weight of the module.
Figure 5-3: Removing the Controller Module from Chassis
Replacing Controller Module Components 5-5