Filter
Top Products
Chapter 5: Subsystem Maintenance and Upgrading
Figure 5-10: Removing the PSU Retention Screw
Step 4. Remove the PSU module by grabbing the rejection handle and pulling
the handle upwards. The rejection handle should gracefully disconnect
the PSU from the backplane connectors. Once dislodged, gently pull
the PSU module out of the subsystem. If the subsystem is mounted in
a rackmount rack, use another hand to support its weight while
removing the module. (See Figure 5-11)
Figure 5-11: Removing the PSU Module
Replacing a Failed PSU Module 5-15