Filter
Top Products
EonStor A16E-G2130-4 Installation and Hardware Reference Manual
WARNING!
All drive trays must be installed into the enclosure even if they do not
contain a hard drive. If the trays are not installed into the enclosure, the
ventilation airflow will not be normalized and the subsystem will overheat.
Step 1. Make sure the rotary bezel lock is in the unlocked
position, i.e., the groove on its face is in a horizontal
orientation. If the groove is in a vertical position, as shown
in Figure 2-6, then the bezel lock is locked and the front
flap on the drive tray cannot be opened.
Figure 2-6: Front View of an Individual Drive Tray
Step 2. Open the front flap on the drive tray. (See Figure 2-7)
Push the release button on the drive tray. The front flap
will spring open.
Figure 2-7: Drive Tray Release Button
Step 3. Align the drive tray with the slot in which you wish to
insert it making sure that it is properly aligned within the
drive bay. Gently slide it in until the drive tray reach the
end of drive bay. This should be done smoothly and
gently. (See Figure 2-8)
Drive Tray Installation
2-12