Filter
Top Products
BIOS User Interface IntelP®P Server Board S3420GP TPS
• Moving the clear system configuration jumper.
• IPMI command (se ystem and
the BIOS Setup loads user set defaults instead of
The recommended steps to load the BIOS defaults are:
1. Power
2. Move the Clear CMOS jumper from pins 1-2 to pins 2-3.
3. Mov he Cl jumper from pin -3 to
4. Pow up th
t S Boot options comm )
• Int15 AX=DA209
• Choosing Load User Defaults from the Exit page of
the BIOS factory defaults.
down the system (Do not remove AC power).
e t ear CMOS s 2 pins 1-2.
er e system.
Revision 1.0
Intel order number E65697-003
64