Filter
Top Products
user@PE2>show connections
CCC and TCC connections [Link Monitoring On]
Legend for status (St) Legend for connection types
UN -- uninitialized if-sw: interface switching
NP -- not present rmt-if: remote interface switching
WE -- wrong encapsulation lsp-sw: LSP switching
DS -- disabled tx-p2mp-sw: transmit P2MP switching
Dn -- down rx-p2mp-sw: receive P2MP switching
-> -- only outbound conn is up
<- -- only inbound conn is up Legend for circuit types
Up -- operational intf -- interface
RmtDn -- remote CCC down tlsp -- transmit LSP
Restart -- restarting rlsp -- receive LSP
Connection/Circuit Type St Time last up # Up
trans
rws1 rmt-if Up May 13 11:25:40
1
ge-0/2/0.0 intf Up
lsp2-1 tlsp Up
lsp1-2 rlsp Up
Configuring PE2 with a Remote Interface Switch over Aggregated Ethernet
CE1 Configuation Configure Ethernet over ATM on the ATM interface
[edit]
interfaces {
at-2/0/0 {
encapsulation ethernet-over-atm;
atm-options {
vpi 100;
}
unit 0 {
vci 100.34;
family inet {
address 30.1.1.1/24;
}
}
}
}
PE1 Configuation Configure the Remote Interface Switch
[edit]
interfaces {
at-2/0/1 {
atm-options {
vpi 100;
}
unit 0 {
encapsulation vlan-vci-ccc;
vpi 100;
vci-range start 32 end 63;
}
}
ge-5/0/0 {
Copyright © 2010, Juniper Networks, Inc.88
Junos 10.4 MX Series Ethernet Services Routers Solutions Guide