Filter
Top Products
802.3ad ae0;
}
}
interfaces ae0 {
unit 0 {
family inet {
address 11.11.11.1/24;
}
}
}
protocols {
oam {
ethernet {
link-fault-management {
interface ae0;
}
}
}
}
Related
Documentation
MX Series Ethernet Services Routers Solutions Page•
• Ethernet OAM Link Fault Management on page 137
• Example: Configuring Ethernet LFM Between PE and CE on page 138
• Example: Configuring Ethernet LFM for CCC on page 139
• Example: Configuring Ethernet LFM with Loopback Support on page 142
Example: Configuring Ethernet LFM with Loopback Support
In this example, LFM is configured between PE and CE. The PE can put the CE in remote
loopback mode. This allows the PE to have all the traffic sent to the CE looped back for
diagnostics purposes, as shown in Figure 22 on page 142.
Figure 22: Ethernet LFM with Loopback Support
To configure LFM between a PE and a CE:
1.
Configure LFM loopback on the PE router:
[edit]
interfaces ge-1/0/0 {
unit 0 {
family inet {
address 11.11.11.1/24;
}
}
Copyright © 2010, Juniper Networks, Inc.142
Junos 10.4 MX Series Ethernet Services Routers Solutions Guide