Filter
Top Products
M160 Internet Router Hardware Guide
5. Align the rear bottom corners of the FP C with the guides at the bottom of the
FPC slot. Slide the FPC into the card cage until it contacts the midplane.
6. Push the ends of the ejector levers inward until they are nearly flush with
the face of the FPC.
7. Tighten t he thumbscrew at each end of the FPC to seat the FPC securely
in the chassis.
8. Repeat the procedure for each F PC, proceeding from left to right through the
slots with offline buttons labeled
FPC1 through FPC7 on the craft interface.
Figure 46: Reinstalling an FPC
1193
R
Ejector
levers
Reinstalling the Fan Tray
The fan tray, which includes the cable management system, is located on
thefrontofthechassis,justabovetheairfilter,asshowninFigure1. To
reinstall it, follow this procedure (see Figure 47):
102 R e installing Components into the Chass is