Juniper Networks M160 Network Router User Manual


 
M160 Internet Router Hardware Guide
Table 11: States for FPC LEDs
Label Color State Description
On steadily FPC is functioning normally.
Blinking FPC is starting up or going offline.
OK
Green
Off FPC is offline or not installed.
FAIL Red On steadily FPC has failed.
Connector Interface Panel (CIP)
The Connect
or Interface Panel (CIP) i s located at the left side of the FPC card cage,
as shown in Figure 1. It houses Routing Engine management ports and alarm relay
contacts, as shown in Figure 14 and described in the following sections:
Routing Engine Management Ports on page 33
BITS Input
Ports on page 34
Alarm Relay Contacts on page 34
32 Connector Interface Panel (CIP)