Filter
Top Products
Settings
Creating a Single Configuration
1. Set the Configuration type to Single.
2. Select Film mask: File print.
3. Select sub-configurations or set to OFF.
4. Select PpF (number of prints per frame). The default value is 1.
5. Enter the Border size, from 4 to 60 mm, or 0 for borderless.
6. Specify Paper configuration and Cut length.
7. Select a crop:
a. Fit image to paper (standard): The image remains unchanged and the
border is added.
b. Fill print size: Center cropping; some image information is lost.
c. Adjust: shorter side / longer side: The image is kept; the cut length is
variable. One side of the digital image is adjusted to the paper width, either
the shorter side or the longer side.
8. Select Save or Save as.
KODAK PROFESSIONAL RP 30 Laser Printer 4-59