Filter
Top Products
Operator’s Guide
Sheet Transfer
1. After pulling the red latch (1), remove the cover (2) of the sheet transfer.
2. Hold the sheet transfer by the handle (3) and lift the sheet transfer out of the
holder.
3. Set the sheet transfer down.
4. Remove the paper dust with a vacuum cleaner.
5. Clean the rollers and transport belts with a lint-free cloth.
6. Mount the unit again.
Note the two locking bolts (4) on the right-hand side wall.
7. Mount the cover by holding the latch in the open position and lowering the cover.
2
1
3
4
NOTE: Make sure that the transport belts are not shifted.
8-12 KODAK PROFESSIONAL RP 30 Laser Printer