Filter
Top Products
Settings
Paper Processor Settings
Setting the Replenishment Rates
NOTE:
CAUTION:
It is not possible to modify the individual replenishment rates. The rates for
Color Developer, Bleach-Fix, and Stabilizer can only be increased or reduced
together at the same ratio. If one of the replenishment rates is changed, the
values of the other two solutions are changed in proportion.
If possible, do not change the preset (default) values. Modified
values should be reset to standard, if required.
1. Touch:
• Settings
• Machine settings
• PP replenishment
2. Enter the required information:
• The replenishment rates (chemicals / water) for the normal replenishment are
indicated in the top part of the screen. More chemicals / water is replenished to
keep up the production stability in case of below average throughput. This
means that the normal replenishment rates are increased by the entered factor
for the increased or the maximum replenishment.
• The replenishment rates to be used depend on the production. The software
calculates daily the average throughput of the last 5 days and sets the
appropriate replenishment automatically. Increased replenishment is activated
for a throughput of less than 10 m
2
, and the maximum replenishment is
activated for a throughput of less than 5 m
2
.
KODAK PROFESSIONAL RP 30 Laser Printer 4-29