Filter
Top Products
Operator’s Guide
Loading Image Files from Data Carriers
Image files loaded from data carriers are combined in an order. The image files can
be loaded from data carriers or from a shared folder in a workstation connected to the
equipment. (See Digital Orders, Settings in Chapter 4).
The individual images of the order can be edited on the equipment and printed
immediately. Or the selection list can be saved and printed later.
1. Open:
• Print mode
• File print
When the screen is opened, the defined standard configuration is automatically
set.
2. Touch the appropriate drive symbol:
• Floppy disk
• DVD/CD-ROM
• Zip
• Folder of a workstation
• PCMCIA
3. If required, select the directory and the sub-directory. Transfer the files in the
current (sub-) directory to the previous screen with OK.
4. The files available on the selected drive/directory are displayed. Select the files:
a. Add all (double arrow) or mark single frames and add (arrow). (All files or
individual files can be removed again from the selection list.)
b. To enter all image files of an order in the selection list, select other
media/directories one after the other and add the desired files, if any.
If files with the same name are included in the list, they are numbered
continuously (for example, tower, tower-2, tower-3).
5. Touch Start print or Save order.
The order can be printed at once with or without preview, or it can be saved and
handled at a later time.
Also see the following sections:
• Saving Digital Orders on Page 6-19
• Loading Saved Digital Orders (File Prints) on Page 6-19
• Printing File Prints without Preview on Page 6-20
• Printing File Prints with Preview on Page 6-21
6-18 KODAK PROFESSIONAL RP 30 Laser Printer