Filter
Top Products
Correcting System Conditions
Paper Transport at the Bottom
With the print engine pulled out:
1. Actuate the two levers (1) and open the locking mechanism.
2. Pull out the transfer unit towards you.
3. Open the levers (2) and hold against the unit as the bottom part of the transport
releases.
4. Pull the flap (3) up and slowly lower the bottom part.
CAUTION: When you return the flap (3) to the operating position, it must be
flush to the side of the transport before you close the lever (2).
KODAK PROFESSIONAL RP 30 Laser Printer 7-11