Filter
Top Products
Operator’s Guide
Cleaning the Dryer Rack
Necessary tools are:
• Screwdriver or coin
• Lint-free cloth and warm water
1. Remove the dryer cover. Use a coin to turn the lock by 90º.
2. Loosen the locking screw (knurled screw 1) of the dryer rack. Pull out the rack on
the telescopic rails.
3. Remove only the feed roller set after unscrewing the knurled screw (2) and put it
in water over the weekend.
CAUTION: If the rollers are not mounted prior to the automatic start after
the weekend, be sure to deactivate the automatic MBL (Master
Balance) in order to prevent a paper jam.
On Monday before starting to work, wipe off all deposits on the
feed rollers and the feed plate with a damp cloth.
4. Clean the guide roller behind the feed rollers with a damp cloth.
5. Check all foam plastic rollers (3) for damages and replace them if necessary.
8-30 KODAK PROFESSIONAL RP 30 Laser Printer