Filter
Top Products
Correcting System Conditions
System Errors
Avoiding Handling Errors
CAUTION:
1.
2.
3.
When shutting down the RP 30 Laser Printer, always use the
End of Work – Shutdown function. Never switch off the RP 30
Laser Printer with the main breaker because this may:
Reduce the service life of the blue/green laser considerably
because the laser fan does not remain on to cool the laser.
Cause problems with the main computer. The operating
system may need to be reinstalled.
Cause paper jams if not all prints have exited the paper
processor.
Error Messages
Error messages can appear in two ways:
1. In the Status line.
These are information or warning messages that do not need to be confirmed.
Work can continue in some cases, but the required operations should be
performed without delay (for example, refilling chemicals or emptying the effluent
tank).
2. In an Error pop-up window.
The work process is stopped. The error must be removed and confirmed by
Clear. For some system errors, the pop-up window disappears automatically
after the error has been cleared.
KODAK PROFESSIONAL RP 30 Laser Printer 7-3