Filter
Top Products
Setting up network printing
3
C550 3-28
8 In the NetWare Settings screen, touch [User Authentication Setting
(NDS)], and then specify settings for the following. After specifying the
settings, touch [Close].
– User Authentication Setting (NDS): Select [ON]. (Depending on the
network environment, select [OFF].)
9 In the NetWare Settings screen, touch [Close].
10 Restart this machine (turn the main power off, then on again).
11 Use the NetWare server console to load MONITOR.NLM.
12 Select the connection information and, in the active connection col-
umn, check that the created PServer is connected.
2
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.
For NetWare 4.x Remote Printer mode (NDS)
1 Log on to NetWare as an administrator from a client computer.
2 Start up NWadmin.
3 Select either the organization or organizational unit container that of-
fers the print service, and then click “Print Services Quick Setup” on
the “Tools” menu.