Setting up network printing
3
C550 3-32
11 Use the NetWare server console to display the print server screen, and
then check that “C550” (created printer) is shown as “Waiting for Job”
for the connected printer (0).
2
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.
For NetWare 4.x/5.x/6 Print Server mode (NDS)
2
Note
To use the Print Server mode, the IPX protocol must be loaded on the
NetWare server.
1 Log on to NetWare as an administrator from a client computer.
2 Start up NWadmin.
3 Select either the organization or organizational unit container that of-
fers the print service, and then click “Print Services Quick Setup (non-
NDPS)” on the “Tools” menu.
4 Enter the appropriate names in the “Printer Server Name”, “Printer
Name”, “Print Queue Name”, and “Print Queue Volume” fields, select
“Other/Unknown” from the “Printer Type” field, and then click the [Cre-
ate] button.
!
Detail
For queue user privileges, printer notification options, assignment of mul-
tiple queues, and passwords, refer to the NetWare documentation, and
specify the settings as necessary.
Next, specify the NetWare settings for this machine as described below.
2
Note
The settings can also be specified from PageScope Web Connection.