Konica Minolta bizhub C550 Printer User Manual


 
Setting up the PCL driver (Windows)
5
C550 5-5
Configure tab
2
Note
To display the Configure tab in Windows 2000/XP/NT 4.0/Server 2003/
Vista, right-click the icon of the installed printer, and then click “Proper-
ties”.
You cannot use the “Acquire Device Information” function if you are not
connected to or able to communicate with this machine.
Settings tab
Remove White Back-
ground
Removes the white background when creating an overlay file with
Microsoft PowerPoint. If this check box is cleared, the background
is not removed and the overlay file is created according to the orig-
inal document data.
Check Driver Version Displays the version information of the printer driver.
Item Function
Item Function
Device Option Specifies the status of the options that are installed on this ma-
chine and the status of the user authentication and account track
functions. Specify the status of each item from the “Setting” drop-
down list.
Paper Tray Information Shows the paper type specified for each tray. Click the [Paper Tray
Settings] button to specify the settings for each paper tray.
Acquire Device Informa-
tion
Communicates with this machine to read the status of the installed
options.
Acquire Settings Specifies the status of the connection that executes getting the
option information.
Encrypt. Passphrase Enters the encryption passphrase when it is user defined by
communicating with this machine.
Software Tools Starts up software tools such as PageScope Web Connection.
Item Function
EMF Spool When using an original system environment, select this check box
if a metafile (EMF) spool is required.
Display Constraint Mes-
sage
Displays a message when functions that cannot be specified at the
same time were enabled from the printer driver.
Display paper set in Print
Server Properties.
Uses the paper that was added in [Server Properties] of the printer
folder.
Verify Authentication set-
tings before printing
Verifies the authentication settings for this machine before printing
and displays a message if the settings are not compatible.