Konica Minolta bizhub C550 Printer User Manual


 
Setting up the PPD driver (Mac OS X)
8
C550 8-28
Front Cover: Attaches a front cover page. Select this check box, and then se-
lect the print conditions from the upper drop-down list, and the paper tray
that contains the loaded paper to be used from the lower drop-down list.
Back Cover: Attaches a back cover page. Select this check box, and then
select the print conditions from the upper drop-down list, and the paper tray
that contains the loaded paper to be used from the lower drop-down list.
PI Front Cover:Attaches a front cover from the post inserter. Select this
check box, and then select the PI tray that contains the loaded paper to be
used from the drop-down list.
PI Back Cover: Attaches a back cover from the post inserter. Select this
check box, and then select the PI tray that contains the loaded paper to be
used from the drop-down list.
Transparency Interleave: Outputs and inserts interleaves when printing over-
head projector transparencies. Select this check box, and then select the pa-
per tray that contains the loaded paper to be used from the lower drop-down
list.
2
Note
To print on the front cover and back cover, select “Print”. To only add a
blank page, select “Blank”.
The PI Front Cover function and the PI Back Cover function are available
only when an optional post inserter is installed.
The PI Front Cover function and the PI Back Cover function cannot be
specified when the Front Cover function and the Back Cover function are
specified.
The “Transparency Interleave” setting can be specified if “Transparency”
is selected as the paper type.