Filter
Top Products
67
Printer memory
You may also want to set the Print Quality menu item to
Graphics or Images, since the 1200 Image Quality setting
requires more memory. If Complex Page errors persist, try
setting Page Protect On from the Setup Menu. If you expe-
rience frequent Memory Full errors, you may want to set
Resource Save Off.
Allocating memory
A portion of printer memory is reserved for input buffers
that hold print jobs sent from your software application.
Your printer has an input buffer for each interface (paral-
lel, serial, network, LocalTalk, or infrared). You can change
the amount of memory allocated to each buffer, depend-
ing on your system requirements. For more information
about using printer menus to allocate memory for each
interface, see the description of the various interface
menus in Chapter 2.
The size of the input buffers varies with the amount of
memory installed in the printer. The following table lists
the default size of the input buffers for each interface. If
your printer is not using a particular interface, the allo-
cated memory is reserved for job processing.
For more detailed information about these input buffers
and memory allocation, refer to the Technical Reference.
Default input buffer size
Installed
memory Each parallel port Each serial port Each network port LocalTalk port Infrared port
32MB 192K
1
150K 1MB 1MB 150K
64MB
96MB
128MB
2MB 300K 2MB 2MB 300K
1
1MB allocated to standard parallel port if no optional adapter is installed.