Filter
Top Products
85
Using the multipurpose feeder
Feeding media
manually
You can also use the multipurpose feeder to feed single
sheets of paper, transparencies, card stock, labels, or indi-
vidual envelopes.
To print a page manually:
1
Select
Manual Paper
or
Manual Envelope
as the paper
source from the operator panel or from MarkVi-
sion:
a
Press
Menu>
or
<Menu
to enter the menus.
Paper Menu
appears on the second line of the dis-
play.
b
Press
Select
to open the Paper Menu.
The
Paper Source
menu item appears on the sec-
ond line of the display.
c
Press
Select
to select Paper Source.
d
Press and release
Menu>
until
Manual Paper
or
Manual Env
appears on the second line of the
display.
e
Press
Select
to set the paper source.
f
Press
Go
to return the printer to the ready state.
2 Select the paper size.
Since the multipurpose feeder does not automati-
cally sense the size of the media you load, you must
select the correct paper size for each job.
You can set the paper size from your software appli-
cation or driver, or follow the instructions below to
set the paper size from the operator panel or from
MarkVision:
a
Press
Menu>
or
<Menu
to enter the menus.
Paper Menu
appears on the second line of the dis-
play.
b
Press
Select
to open the Paper Menu.