Filter
Top Products
3-45Using the Admin Tools
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
Using the Admin Tools
3
To register a new distribution rule, click the number that does not contain a
distribution rule. To edit a distribution rule, click the desired distribution rule.
The “Fax Forwarding Setting” screen will appear.
4
Adjust the settings and select [Save] to register them.
Item Description
“Setting” Specifies whether to enable the setting you have config-
ured. Check this box to enable the setting.
NOTE: When this is disabled, the settings are invalid
even if they are set.
“Setting Name” When making multiple distribution settings, this sets a
name for identifying a distribution setting.
The name can contain up to 30 characters.
“Forwarding Condi-
tions”
Select the forwarding checkbox.
If you want to allow forwarding to a specified sender
only; (1) click [Specify Sender(s)], (2) enter the detail
conditions, (3) click [Save].
NOTE: When the machine receives an e-mail that
contains the forwarding request to a fax, it will
be handled by the setting of “When mail that
requests fax forwarding is received” on the “E-
mail Settings” rather than this setting.