Filter
Top Products
Chapter 7 Disk Array Configuration Setting
IV-40
[Next] button: One of the following screens is displayed according to the specified way of binding the logical
disks:
y Check-marking on [Only specify the number of LDs]:
Displays the “Specify Number of LDs” screen.
y Check-marking on [Only specify LD capacity]:
Displays the “Specify the Capacity” screen.
y Check-marking on [Specify both the number of LDs and LD capacity]:
Displays the “Specify Number of LDs and LD Capacity” screen.
[Back] button: Displays back the “Free Area Selection” screen. When you select a pool without multiple
unused areas or dynamic pool, the “Pool Selection” screen is displayed again.
[Cancel] button: Displays a confirmation to ask whether you want to quit the wizard, then the wizard closes if
agreed.
Although the capacity specified in the field is that of the region you can use, there are some region for controlling
the disks of the pools in addition to the region usable by the user.