Filter
Top Products
Appendix B Configuration Setting Command
5
-arrayname option: Specifies the name of the target disk array.
Since the relationship between the disk array name and
the special file name (UNIX version) or disk number
(Windows version) is obtained from the “volume
information data”, it is necessary to confirm that the
“volume information data” has been updated to the
latest version. For information on how to update the
“volume information data”, refer to “volume list
command” in the “User’s Manual” or “User’s Manual
(UNIX)” in accordance with the OS in use.
-chgscsivalidaddress option: Changes the IP address of the monitoring server for
which access is permitted. The IP address changed
with this option takes effect when the access
restriction function is enabled (scsiguardinvalid is off).
Up to eight of this option, including the
addscsivalidaddress and delscsivalidaddress options,
can be specified simultaneously.
-delscsivalidaddress option: Deletes the IP address of the monitoring server for
which access is permitted. The IP address changed
with this option takes effect when the access
restriction function is enabled (scsiguardinvalid is off).
Up to eight of this option, including the
addscsivalidaddress and chgscsivalidaddress options,
can be specified simultaneously.
-file option: Reads the file storing the settings and sets the service
processor. The settings can be made for multiple
disk arrays simultaneously.
-force option: Forcibly makes settings even during configuration
setting by another configuration setup command.
-gateway option: Sets a Gateway Address. Specify the Gateway
Address in the input format of “aaa.bbb.ccc.ddd” (in
decimal).
-ipaddress option: Sets the IP Address of the target disk array. Specify
the IP Address in the input format of
“aaa.bbb.ccc.ddd” (in decimal).
-ipcheckinvalid option: Enables the omission of a check on if the IP Address
specified in the ipaddress option is already used by
another network equipment. The option also enables
the omission of a check conducted to see whether any
of the IP addresses specified with the ipaddress,
subnetmask, gateway, addscsivalidaddress,