Filter
Top Products
Chapter 6 Parameters
IV-5
Table 6-1 Setting/Display Parameter List (4/4)
Disk Array Series Name
Setting/Display
Screen
Setting/Display Parameter
*1
1100 1200
100/
1300
2100 2200 2300
3100/
4100
3300/
4300
Setting/Displaying Disk
Array Name
√ √ √ √ √ √ √ √
Nickname Setting
Setting/Displaying Port
Name
√ √ √ √ √ √ √ √
Platform Setting
Setting/Display Port
Platform
− √ √ − √ √ − −
Network Setting
Setting/Display Disk
Array Network
− √ √ − √ √ − −
License Unlocking License
− − √ − − √ − √
Setting/Displaying Cross
Call
√ √ √ √ √ √ − −
Setting/Displaying Auto
Assignment
√ √ √ √ √ √ − −
Setting/Displaying Spare
Mode
√ √ √ √ √ √ − −
Setting/Displaying Expand
LUN
√ √ √ √ √ √ − −
Setting/Displaying Disk
Array Time
√ √ √ √ √ √ − −
Special Setting
Get Log *3
√ √ √ √ √ √ − −
Access Control
Setting
Setting/Displaying Access
Control
√ √ √ √ √ √ √ √
Setting/Displaying Access
Control
− − − − − − √ √
Initialization of Logical
Disk
− − − − − − √ √
Initialization of EVN
(Extended Volume Name)
− − − − − − √ √
LD Administrator
Setting
Setting/Displaying of
Performance Optimization
− − − − − − √ √
Setting Cache
Segment
Setting Cache Segment
− − − − − − √ √
Assigning Logical Disk
/Freeing Logical Disk
− − − − − − √ √
Displaying Segment State
− − − − − − √ √
Get Configuration
Information
Get Configuration
Information *3
√ √ √ √ √ √ √ √
√: Specifiable −: Not specifiable
Notes:
*1: To set the parameters, your user level needs to be L3 (level 3). However, it is allowed for any user whose user
level is L1 (level 1) or L2 (level 2) to display the parameters in reference mode. For information about the
operation levels, refer to 6.2 “Operating Range”.
*2: While the Rebuild Start Instruction parameter can also be operated in reference mode, your user level needs to be
L3 (level 3).
*3: The Get Log and Get Configuration Information parameters can also be operated in reference mode.