Filter
Top Products
Chapter 7 Disk Array Configuration Setting
IV-48
Clicking the [Change] button on the “Setting Detail Parameter for LD Binding” screen displays the [Change]
dialog:
Figure 7-40 Change Dialog Box
OS Type/LD Name: You can specify the format and name of the logical disks to bind. The logical disk name
must be unique in the system. (Do not assign the same name twice or more.) Therefore,
when you bind multiple sets of logical disks simultaneously, the logical disks are named
with the character string specified and automatically numbered in order.
The initial value of the logical disk name field consists of 20 characters; 16 characters
specific to the disk array and 4 characters of the logical disk number. When you do not
make any change for logical disk name, the initial value is used in the form mentioned
above:
Example: 200000004C518CAC0000, 200000004C518CAC0001, ...
Not changing the logical disk format displays a blank in the OS Type field.
Note that inputting a blank to the format sets the initial values for shipment; a blank in the
OS Type field and 16 characters specific to the disk array + 4 characters of the logical disk
number in the Name field.
Table 7-1 lists the selectable logical disk formats.