Filter
Top Products
Chapter 10 Access Control Operations
IV-208
(1) [Start Access Control] button
Clicking this button will validate Access Control settings from the business server to logical disks.
Clicking the [Start Access Control] button displays the following confirmation message:
Figure 10-24 Start Access Control
In the iSM client, once Access Control has been started, Access Control cannot be stopped. (If necessary,
consult with a maintenance engineer.)
If Access Control is already in operation, the [Start Access Control] button is inoperable.
The Start Access Control operation immediately reflects on the Disk Array. Therefore, if assignment of logical
disks to LD Sets or Link Path settings is wrong, there is a possibility that accessing from the business server to
logical disks may not be possible. It is necessary to perform operation after checking the operation state.
Furthermore, stop business or the business server according to the necessity.