Filter
Top Products
Chapter 10 Access Control Operations
IV-202
Furthermore, when selecting multiple LUNs which have not assigned logical disks, the selected LUNs must be
sequential.
Only a newly added logical disk group can be moved on this dialog screen. Logical disks cannot be moved to the
LUN displayed as the
icon. Furthermore, the LUN to which logical disks have been assigned cannot be changed.
Logical disk information displayed on the “LD Setting” dialog screen is as follows:
LUN
: LUN to which newly added, movable logical disks are assigned
: LUN whose logical disks cannot be moved
Number
OS Type
Logical Disk Name
RAID
Capacity
On the “LD Setting” dialog screen, the following buttons are operable.
[Top] Moves a selected logical disk in a newly added logical disk group to the top line of the newly added logical
disk group.
[Up] Moves a selected logical disk in a newly added logical disk group to the previous line of the newly added
logical disk group.
[Down] Moves a selected logical disk in a newly added logical disk group to the following line of the newly added
logical disk group.
[Bottom] Moves a selected logical disk in a newly added logical disk group to the end line of the newly added logical
disk group.
[OK] Clicking this button displays a dialog for preliminarily confirming the addition: