Filter
Top Products
Chapter 7 Disk Array Configuration Setting
IV-76
disk number in the Name field.
Table 7-2 lists the selectable logical disk formats.
You can change the logical disk format and name later from the main window on the iSM
client or according to 7.2.4 “Renaming a Logical Disk”.
Table 7-2 List of Formats
(1) Any logical disk name that does not conform to the following rules is invalid:
• Number of available characters: 1 to 24 characters
• Available characters: Alphabet: A to Z (a to z)
* Upper- and lower-case characters are distinguished.
Numerals: 0 to 9
Underbar: _
Slash: /
* All the characters must be 1-byte characters.
(2) An invalid specification applies the logical disk name to be assigned by default.
(3) On the ACOS-4 system, use the logical disk id names same with those on the host.
For details about the format A4, refer to Appendix G “ACOS-4 Resource Operation Guard”.
Start Number: A number which is equal to or higher than the specified logical disk number and still
unused is assigned.
When this parameter is omitted (or if the specified number is invalid), the number
subsequent to the largest logical disk number already occupied is assigned.
Format Description
A2 Logical disk operated on the ACOS-2 system
A4
Logical disk operated on the ACOS-4 system (If you are setting this
format, ask our maintenance engineer.)
AX Logical disk operated on the AIX system
CX Logical disk operated on the Solaris system
LX Logical disk operated on the Linux system
NX Logical disk operated on the HP-UX system
WN Logical disk operated on the Windows system