Filter
Top Products
Chapter 10 Access Control Operations
IV-216
(2) Candidate LD List
This is a list view of logical disks which can be assigned to LD Sets. Selective display is possible by entering
keywords in the combo box.
(a) List view
y Display items are as follows:
Number
OS Type
Logical Disk Name
RANK/Pool No. (The pool number is displayed only on the disk array with pool (in hexadecimal and with four
digits.)
Pool Name (displayed only on the disk array with pool.)
RAID
Capacity
Group
Preserve Logical disk assigned to an LD Set
(Blank) Logical disks in the Preserve Group
Purpose
RPL Logical disks set in pairs only for replication
snapshot Logical disks with snapshot setting (BV)
Link-volume Logical disks set as link-volume (LV)
RPL/snapshot Logical disks set in pairs for replication and snapshot setting
(Blank) Ordinary disk with no special purpose settings
Port (Displayed when using a disk array to which “AccessControl(WWN)” is applied)
yes Logical disk assigned to a port mode port
(Blank) Logical disk which is not assigned to a port mode port
However, the port items are automatically displayed only when a Port mode port exists.
The logical disk display item order can be changed. For information on the settings, refer to “Client Start/Stop” in
the “User’s Manual” or “User’s Manual (UNIX)” in accordance with the OS in use.
y Display items can be sorted, but their order cannot be changed.
y Logical disks assigned to LD Sets are also displayed.
y When selecting logical disks which are to be assigned to business, one logical disk or multiple logical disks can be
simultaneously selected.