Filter
Top Products
Chapter 9 Configuration Setting (Common to All Units)
IV-164
dialog box in Figure 9-10.
Figure 9-11 Setting Change Confirmation Dialog Box
Be careful that if the network setting of a disk array is changed incorrectly, the disk array becomes invisible from
iSM.
After making a change of an IP address unused for a control path, you need to modify (re-set) the settings according
to the change by using Environment Settings on the iSM server.
(1) Set up Disk Array TCP/IP Information
Specify the IP (Internet Protocol) of the disk array. The current value is displayed before the IP Address is
changed.
(2) Set up SCSI Socket
Specify the iSM server that monitors the target disk array through the Ether path.
Figure 9-12 Set up SCSI Socket Screen