Filter
Top Products
Appendix B Configuration Setting Command
9
(d) SNMP Information
Displays the SNMP-related information
Community Name: Displays the community name.
SNMP Trap Transmission IP Address: IP address to which trap messages are to be
transmitted. If no IP address is registered, “---” is
displayed.
SNMP Valid: Indicates whether the SNMP request restriction is
valid or invalid.
on: The SNMP request restriction is invalid,
accepting SNMP requests from any host.
off: The SNMP request restriction is valid,
accepting SNMP requests only from registered
hosts.
SNMP Valid IP Address: IP address from which SNMP requests are accepted.
If no IP address is registered, “---” is displayed.
(e) Trap Information
Displays the trap-related information.
Trap Sense Interval: Displays the SNMP trap sense interval.
Unit Contact: Displays the management information transmitted in
the SNMP trap.
Unit Name: Displays the system name transmitted in the SNMP
trap.
Unit Location: Displays the installation location information
transmitted in the SNMP trap.
Unit Info: Displays the other information transmitted in the
SNMP trap.