Filter
Top Products
Chapter 7 Disk Array Configuration Setting
IV-75
(6) Specifying the detailed settings of the logical disks
The “Setting Detail Parameter for LD Binding” screen allows checking for the format, name, and initial number
of the logical disks, and the time to bind them.
Figure 7-65 Specifying the Detailed Settings of the Logical Disks
OS Type/Name: You can specify the format and name of the logical disks to bind. The logical disk name
must be unique in the system. (Do not assign the same name twice or more.) Therefore,
when you bind multiple sets of logical disks simultaneously, the logical disks are named
with the character string specified and automatically numbered in order.
The initial value of the logical disk name field consists of 20 characters; 16 characters
specific to the disk array and 4 characters of the logical disk number. When you do not
make any change for logical disk name, the initial value is used in the form mentioned
above:
Example: 200000004C518CAC0000, 200000004C518CAC0001, ...
Not changing the logical disk format displays a blank in the OS Type field.
Note that inputting a blank to the format sets the initial values for shipment; a blank in
the OS Type field and 16 characters specific to the disk array + 4 characters of the logical