Filter
Top Products
Chapter 8 Disk Array Configuration Setting (S100/S1100/S1200/S1300/S2100/S2200/S2300)
IV-127
the LD name.
A list of selectable LD Type is shown in Table 8-2.
The LD Type and LD name can be changed later on the main screen of the iSM client or in 7.2.4 “Renaming a
Logical Disk”.
Table 8-2 List of LD Type
LD Type Description
A2 Operating LDs by the ACOS-2 system
A4 Operating LDs by the ACOS-4 system
(If you are setting this type, ask our maintenance personnel.)
AX Operating LDs by the AIX system
CX Operating LDs by the Solaris system
LX Operating LDs by the Linux system
NX Operating LDs by the HP-UX system
WN Operating LDs by the Windows system
1. LD name which do not abide by the following regulations cannot be set.
• Number of available characters: 1 to 24 characters
• Available characters: Alphabet: A to Z (a to z)
* Upper- and lower-case characters are distinguished.
Numerals: 0 to 9
Underbar: -
Slash: /
* All the characters must be 1-byte characters.
2. If this set value is in error, the same LD name as when this setting is omitted is given.
3. On the ACOS-4 system, make sure that the LD name matches the LD identifier name on the host.
For information on the “A4” format, refer to Appendix G “ACOS-4 Resource Operation Guard”.