Filter
Top Products
Chapter 7 Disk Array Configuration Setting
IV-28
You cannot unbind the pool if any of the logical disks in it are:
1. In Access Control (Port mode).
2. In Access Control (WWN mode).
3. Paired.
4. SRA bound (snapshot).
5. Link setting is performed (snapshot).
6. Assigned to a cache segment (setting cache segment).
7. A reserve group is set (LD Administrator).
To unbind the pool, be sure to release the logical disks in the states mentioned above, if any.
5. When the pool is successfully unbound, the following message is displayed. When the logical disks are
unbound together, a message is displayed for successful completion of unbinding the logical disks first, then a
message is displayed for successful completion of unbinding the pool.
Figure 7-22 Message for Successful Completion of Unbinding Logical Disks
Figure 7-23 Message for Successful Completion of Unbinding Pool