Filter
Top Products
Chapter 10 Access Control Operations
IV-211
(b) List view
y Items displayed in the list of logical disks are as follows:
LUN
Order in which logical disks are recognized by the business server
: LUN to which logical disks are assigned
: LUN to which logical disks are not assigned
Number
OS Type
Logical Disk Name
RAID
Capacity
Purpose
RPL Logical disks set in pairs only for replication
snapshot Logical disks with snapshot setting (BV)
Link-volume Logical disks set as a link-volume (LV)
RPL/snapshot Logical disks set in pairs for replication and snapshot setting
(Blank) Ordinary disk with no special purpose settings
Port (Displayed when using a disk array to which “AccessControl (WWN)” is applied)
yes Logical disk assigned to a Port mode port
(Blank) Logical disk which is not assigned to a Port mode port
However, the port items are automatically displayed only when a Port mode port exists.
The logical disk display item order can be changed. For information on the settings, refer to “Client Start/Stop” in
the “User’s Manual” or “User’s Manual (UNIX)” in accordance with the OS in use.
When LD Sets are not selected by using check boxes in the tree view, the list view is displayed in gray
background color and LUN selection is not possible. Furthermore, when LD Sets are selected by using check
boxes, the list view is not displayed by clicking the “LD Set” item which shows all the LD Sets or by clicking an
individual LD Set.
y When clicking the “LD Set” item which shows all the LD Sets, items displayed in the list of LD Sets are as
follows:
Platform
: LD Set linked with path information
: LD Set unlinked with path information
The following two icons indicate abnormal settings. If these icons are displayed, it is necessary to change the
setting to the normal setting.