Filter
Top Products
Chapter 8 Disk Array Configuration Setting (S100/S1100/S1200/S1300/S2100/S2200/S2300)
IV-124
(5) LD Batch Binding screen
The LD Batch Binding screen is shown in Figure 8-23. The displays and setting items in the screen are
described below.
Figure 8-23 LD Batch Binding Screen
(A) PD Group Number
The PD group of LD Batch Binding is specified here. The PD groups existing in the disk array are displayed in
the pull-down list. Select one from the list.
The PD group refers to a management aggregate of PDs; therefore, it is impossible to form a configuration
spanning two or more PD groups. Binding logical disks shall be set within this PD group.
(B) Physical Target Disk
Select batch binding target physical disks.
• All the PD
Batch binds all physical disks that exist in the specified PD group. Unbinds all the spares and RANKs which
have already been bound, and newly binds them.
(A)
(C)
(D)
(E)
(F)
(G)
(B)