Filter
Top Products
Chapter 10 Access Control Operations
IV-198
Logical disk information displayed on the “LD Setting” dialog screen is as follows:
LUN
: LUN to which newly added, movable logical disks are assigned
Number
OS Type
Logical Disk Name
RAID
Capacity
On the “LD Setting” dialog screen, the following buttons are operable.
Moreover, one logical disk can be selected at a time to move the logical disk on this dialog screen. The logical disks
in the list can be sorted into a different order according to an item other than LUN.
[Top] Moves a selected logical disk to the top line of the logical disk group.
[Up] Moves a selected logical disk to the previous line.
[Down] Moves a selected logical disk to the following line.
[Bottom] Moves a selected logical disk to the end line of the logical disk group.
[OK] Clicking this button displays a dialog for confirming the new settings. If the new settings delete logical
disks from the LD set, a dialog for confirming the logical disks to be deleted is displayed, and then a dialog
appears to confirm the new settings.
Figure 10-15 Preliminary Confirmation Dialog (for Logical Disks Deleted)