Nortel Networks CallPilot Network Card User Manual


 
10 Chapter 2 Using CallPilot
P0919417 02.2
About telephone buttons
This table shows the Nortel Networks Business Series Terminal buttons. Use the buttons that
pertain to the type of telephone you use.
You can enter
,
ƒ
or
ƒ
and the code to use a feature. For example, press
≤·°⁄
to access your mailbox.
The T7100 works differently from other telephones on your system because it does not have line
buttons. Where other telephones require that you select a line button to answer a call, on the T7100
terminal you pick up the handset. Where other telephones require you to select a line button to take
a call off hold, you press
on the T7100 terminal.
On T7100 terminals, you can answer a second call by pressing
. Your active call is put on hold
and you connect to the waiting call. You can have no more than two active calls at one time.
The T7100 terminal does not have a
© button.
Alternate extensions
You can have up to two Alternate extensions for your mailbox.
If a caller dials the main extension (an extension that has Alternate extensions assigned), the call
rings only at the main extension. If the call is not answered and the caller leaves a message, a
message indicator appears at the main extension and any Alternate extensions. You can access the
message from Alternate extensions with the Open Mailbox feature (
≤·°⁄
), the same way
that you access messages from your main extension phone. Only an extension without a mailbox
assigned to it can be used as an Alternate extension.
If an Alternate extension is assigned to a phone with Caller ID (CLID) and Call Display is enabled,
CLID information appears on the display. If the call is not answered, the call goes to CallPilot and
an audible tone occurs at all phones. For information on enabling Call Display refer to Call
Forward with Caller ID on page 61.
You can intercept the caller by using the Interrupt feature,
≤·°‡
, from any phone as long
as the caller is still leaving a message. For more information on Interrupt refer to Interrupting a
caller on page 42.
Button name T7100, T7208, T7316
M7100, M7208, M7310,
M7324
M7100N, M7208N,
M7310N, M7324N
Feature
ƒ ƒ
Handsfree Bottom right-hand
button
© ©
Hold
˙ ˙
Volume Control
Release
® ® ®