Filter
Top Products
PNNI in an ATM Network
893-01006-C
4-17
Configuring PNNI with SpeedView
In setting up PNNI networks with SpeedView, you need to configure only a node
ID and peer group ID for each switch. In most cases, you can use the default
values and may normally change only the Node Level. For the Centillion 50/100
and Model 5000BH switches, PNNI is configured in the PNNI dialog box
(Figure 4-6).
Figure 4-6. PNNI Dialog Box
Note:
In most cases, default values should be used for all fields in the PNNI
dialog box except the Node level. The following field explanations are for
information only.