Filter
Top Products
98
OKIFAX 5650
|
7 Enter the Location ID. This is a descriptive title up to 16
characters long. Refer to the instructions below.
• To enter numbers, use the numeric keypad (press once)
• To enter spaces, press the 19/Space One-Touch key
• To enter hyphens (-), press the Hyphen key
• To enter alphabet characters, locate the character you
want on the numeric keypad. Press that key repeatedly
until the character appears in the display.
• To enter a unique character, press the 0/Unique key
repeatedly until the character you want appears in the
display. The following characters are available:
Symbols: ! # & ‘ ( ) * + , - . / : ; = ? ·
Internet characters: @ \ “ _ %
- l
The
- l
functions as a tilde symbol.
Umlaut characters: Ä ß Ñ Ö Ü
Norwegian characters: Æ Å Ø æ å ø
• To enter two successive letters/numbers on the same
key, press the No ᮣ key to move to the next character.
• To move the cursor to make corrections, press the Yes
ᮤ and No ᮣ keys
8 Press the Start key. The display shows (for about three
seconds).
NO=<OR LOCATION>
9 Enter the optional alternate fax number, if desired. Refer to
the instructions following Step 5.
10 Press the Start key to finish programming the One-Touch
key.
The display shows
LOCATION
PROGRAMMING.
11 To continue programming One-Touch keys, go back to
Step 3. If you are finished programming, press the Select
Function key.
12 Lift off the plastic cover above the One-Touch label.
Using a pencil, write in the location name for your One-
Touch key(s). Then replace the cover.
!
Print the Phone Directory when you finish
programming. This provides a reference of the speed
dial numbers already programmed.
To obtain additional One-Touch key labels, refer to the
“Options and Consumables.”