Filter
Top Products
|
User’s Guide: English 29
To Program Your Fax ID
1 Press the Select Function key.
2 Press the 9/User Program One-Touch key. The display
shows
1:FUNC. PROGRAMMING.
3 On the numeric keypad, press 4. The display shows
4:SYSTEM DATA PRG.
4 Press the Yes ᮤ key. The display shows
NO=<TSI/CSI>
ID=<SENDER ID>.
5 After the display clears, enter the full telephone number of
your fax machine using the numeric keypad.
!
Use the Hyphen key to enter a “+” character for
international numbers, and use the 19/Space One-Touch
key to enter spaces.
6 Press the Start key to save your entry.
7 Enter your Sender ID. This is a descriptive title up to 32
characters long. Refer to the instructions below.
• To enter numbers, use the numeric keypad (press once)
• To enter spaces, use the 19/Space One-Touch key
• To enter hyphens, use the Hyphen key
• To enter alphabet characters, locate the character you
want on the numeric keypad.
Press that key repeatedly until the character appears on
the display.
• To enter a unique character, press the numeric keypad
0/Unique key repeatedly until the character you want
appears on the display.
Symbols: ! # & ‘ ( ) * + , - . / : ; = ? ·
Internet characters: @ \ “ _ %
- l
The
- l
functions as a tilde symbol.
Umlaut characters: Ä ß Ñ Ö Ü
Norwegian characters: Æ Å Ø æ å ø
• To enter two successive letters/numbers using the same
key, press the No ᮣ key to move to the next character.
• To move the cursor to make corrections, press the
Yes ᮤ and No ᮣ keys.