Filter
Top Products
104
OKIFAX 5650
|
Auto Dial Faxing
Programming Auto Dial Numbers
For each Auto Dial number, you can enter a fax number up to
40 digits long and a Location ID (name) up to 15 characters
long.
To program Auto Dial numbers:
1 Press the Select Function key.
2 Press the 8/Location Program One-Touch key.
The display shows
LOCATION PROGRAMMING.
3 Press the Auto Dial key.
4 Using the numeric keypad, enter a 2-digit or 3-Digit
number for the Auto Dial number you want to program.
Up to 150 Auto Dial numbers can be programmed.
5 The display briefly shows
NO=<FAX NO.>,
ID=<LOCATION ID>
or a previously programmed fax number and location.
6 After the display clears, enter the fax number. Refer to the
instructions below.
• To enter numbers, use the numeric keypad (press once)
• To enter spaces, press the 19/Space One-Touch key
• To enter hyphens (-), press the Hyphen key
• To enter pauses (i.e., to wait for long distance or outside
lines), press the 20/Pause One-Touch key
• To add a switch from pulse to tone dialing for part of
the call, press the */Tone key
• To move the cursor to make corrections, press the Yes
ᮤ and No ᮣ keys
7 Press the Start key to register the number.