Filter
Top Products
|
User’s Guide: English 131
Initiating a Relay Broadcast
!
If you do not load your document at Step One, you will
be prompted to do so after Step 6.
1 Load the document(s).
2 Press the Select Function key.
3 Press the 4/Relay Initiate TX One-Touch key.
You now have two options.
A. First Time Use
The first time you use this feature, the display shows:
RELAY PASSWORD
Using the numeric keypad, enter the 4-digit relay
password.
B. Subsequent Use (after the first time)
If you have already used this feature, the display shows:
RELAY PASSWORD [XXXX]
where XXXX is the last password you used.
If the password is correct, go to Step 4.
To use a different password, press the No ᮣ key.
Then use the numeric keypad to enter the password for
the relay key station you want to use.