Filter
Top Products
40
OKIFAX 5650
|
17 Start key
Press this key to initiate the operation indicated on the
display or to confirm information you have entered into
the display.
18 One-Touch keypad
Each of the keys on this keypad can be programmed with
a fax number. You can dial this number by pressing the
corresponding key. Refer to the “Programming Speed Dial
Numbers, One-Touch Faxing“ section of this document for
details. The keys are also used to control and program fax
machine functions.
19 + (Plus) key
In addition to its function as a programmable One-Touch
key, this key is used for chain dialing, which allows you to
dial a number using any combination of One-Touch keys,
Auto Dial numbers, and the numeric keypad. When
programming a chain dial number into a One-Touch key
or Auto Dial number, press the Plus key (One-Touch keys
18 and 38) at the end of the first part of the number to
indicate that this is a chain dial number. Refer to the
“Programming Speed Dial Numbers, Chain Dialing”
section of this document for details.
20 Space key
Use One-Touch keys 19 and 39 on the One-Touch Keypad
to enter spaces while programming. Unlike the Pause and
Hyphen keys, spaces are used for easier reading only and
have no effect on dialing.
21 Pause key
Use One-Touch keys 20 and 40 on the One-Touch keypad
to enter automatic 3-second pauses in dialing when
programming telephone numbers. Pauses in telephone
numbers are marked by a “P” symbol.
22 One-Touch labels
After programming a location into a One-Touch key, write
the location’s name on the One-Touch label. Lift off the
plastic cover above the One-Touch label, use a pencil to
write in the name, then replace the cover.
You may need replacement (blank) labels.
See “Options and Consumables.”