Filter
Top Products
58
OKIFAX 5650
|
14 USER LANGUAGE
This function allows you to switch between the two
languages programmed into your fax machine. Available
settings are ENG. (English, the default) and SPA.
(Spanish), FRE. (French), or POR. (Portuguese), depending
on what fax machine language configuration you
purchased.
15 INCOMING RING
This function controls the telephone ringing sound your
fax machine makes when a call comes in. When set to off,
it does not ring during incoming calls. The available
settings are:
• ON (default): Only rings when set to Manual Receive
[TEL] mode or when the RING RESPONSE function is
set to 5, 10, or 20 seconds.
• OFF: Does not ring when a call comes in.
• DRC (distinctive ring cancel): Rings for each incoming
call with the same tone, even if you have set function
setting 12, DISTINCTIVE RING to on.
16 REMOTE RECEIVE
This function lets you use an attached phone to tell your
fax machine to switch from telephone to fax mode so it
can receive an incoming fax. Use the keypad of an
external telephone to enter the remote receive number you
have programmed into your fax machine.
In addition, if your fax machine is in TAD mode, a caller
can enter the programmed remote receive number after
leaving a voice message; this enables the fax machine to
receive a fax from the caller. Refer to the “Setting Basic
Features, Answering Mode, Using Your Fax with an
Answering Machine [TAD]” section of this document.
Available settings are OFF (default), 00, 11, 22, 33, 44, 55,
66, 77, 88, 99, **, and ##.