Filter
Top Products
|
User’s Guide: English 83
Redialing
If the line is busy or if there is no answer, your fax machine
waits, and then automatically redials the number. The dial
parameter settings determine how many times it redials and
how long it waits between attempts.
Refer to “Setting Basic Features, Dial Parameters Settings.”
If your fax machine is transmitting from memory and a
communication error occurs, it automatically re-dials the
number and tries to send the fax again.
You can redial a number manually at any time by pressing
the Redial key.
!
If a power loss occurs, the redial information is lost.
Refer to “Basic Faxing Operations, Power Failures and
Memory.”
Confirming Results
After transmission, press the Copy key once (with no
documents loaded) to see the result of your transmission
(Message Confirmation [MCF]) on the display. To print the
MCF report, press the Copy key a second time.
Refer to “Reports, Message Confirmation Report.”
Stopping a Transmission
To stop a transmission in progress, follow the instructions
below.
1 Press the Stop key twice. The display shows STOPPED.
2 If documents are stuck partway through the document
feeder, you may see a RELOAD DOCUMENT message on
the display.
3 Press the Stop key again. Your fax machine feeds the
document the rest of the way through the document
feeder.