Filter
Top Products
138
OKIFAX 5650
|
Sending a Delayed Fax from Memory
!
This is the fax unit’s default.
User Function 17, Mem./Feeder SW must be set to
MEMORY. Refer to “Setting Basic Functions, User
Function Settings, User Function Settings List, 17
Mem./Feeder SW.”
You can send the fax to multiple locations.
You may have twenty delayed faxes loaded into your fax
machine.
The fax machine can be used for other transmissions
while a delayed fax is waiting to be sent.
This procedure can be performed with or without
documents loaded.
If you do not load your document(s) at Step 1, you will
be prompted to do so after Step 15.
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One-Touch key. The display
shows
DELAYED TX
[today’s date]
4 If the transmission is to occur on the same day, skip to step
6. Otherwise, press the No ᮣ key. The display shows
PRG. START TIME 0-9.
5 Using the numeric keypad, enter the date you wish the
transmission to begin. Your entry may be up to three days
in advance.