Filter
Top Products
140
OKIFAX 5650
|
13When you are finished selecting locations, press the No ᮣ
key [when the SELECT LOCATION(S) message is
displayed].
14If you have selected multiple locations, the unit will ask
you if you want to confirm your selections with a printed
report before proceeding.
• If you do, press the Yes ᮤ key. After the report is
printed, the display shows BEGIN SCANNING?
• If you want to make corrections, press the No ᮣ key
and go back to Step 9.
• To remove a location, select the location in the same
way, but press the No ᮣ key to delete it from your
transmission.
15When all of your selections are correct, press the Start key.
The fax machine scans the documents into memory and
waits until the time and date you have set before sending
the fax. When scanning is completed, the unit is available
for other transmission operations.
If you did not load your document(s) in Step 1, the
machine now prompts you to do so.
Canceling a Delayed Transmission
1 Press the Stop key. The display shows
COMMUNICATION CANCEL.
2 Press the Yes ᮤ key. The display shows the Location ID of
the delayed transmission currently loaded in the fax
machine.
3 Press the Yes ᮤ key.
4 If the delayed transmission was a feeder transmission,
press the Stop key again to remove the document from the
document feeder.