Filter
Top Products
48
This chapter explains about SETUP MENU (On-screen
Display setup menu) of this unit.
■ Basic Operations
To control SETUP MENU, display SETUP MENU on a moni-
tor.
● WV-CU950/650
1. Select a desired monitor. (Refer to p. 21 Monitor
Selection.)
2. Press the MENU button repeatedly until "System Setup"
appears on the LCD.
3. Press the F1 button. SETUP MENU will be displayed on
the selected monitor.
● WV-CU360C/CJ
1. Select a desired monitor. (Refer to p. 21 Monitor
Selection.)
2. Press the SETUP button while holding down the SHIFT
button.
SETUP MENU will be displayed on the selected monitor.
● Top Menu
When SETUP MENU is opened, the top menu is displayed
on the monitor.
Moves the cursor: Move the joystick. The cursor is highlight-
ed when you point.
Moves to the next/previous page (When the displayed menu
has two or more pages):
Move the cursor to the top or
bottom. The next or previous page will be displayed on
the monitor.
Note: When using WV-CU950/650, you can perform this
operation by rotating the shuttle ring or moving the
zoom wheel controller.
Changes the selected parameter: Rotate the JogDial, or
press the + or – button.
Enter the numeric parameter: Press the numeric buttons. To
clear the numeric entry, press the CLEAR button.
Moves to the lower menu: Move the cursor to a setting item
which has an arrow mark, and then press the CAM
(SET) button.
Moves to the upper menu: Press the MON (ESC) button.
Exits the SETUP MENU: When using WV-CU950/650, press
the F2 button. When using WV-CU360C/CJ, press the
SETUP button while holding down the SHIFT button.
Notes:
• Sequence is stopped on monitors displaying SETUP
MENU.
•Alarms are not activated on monitors displaying SETUP
MENU.
SETUP MENU (OSD)
WJ-SX650 SETUP MENU
100 TIME&DATEO
300 ALARMO
400 RECORDERO
500 SYSTEMO
800 INFORMATIONO
900 LANGUAGE ENGLISH